Danfoss VLT HVAC Basic Drive FC 101 Technical Information PDF herunterladen (Seite 92)

5.1.17 24-** Appl. Functions 2

Par.

No. #

Parameter description Default value 2-set-up Change

during

operation

Conver-

sion index

Type

24-0* Fire Mode

24-00 FM Function [0] Disabled 1 set-up TRUE - Uint8

24-05 FM Preset Reference 0 Hz All set-ups TRUE -2 Int16

24-09 FM Alarm Handling [1] Trip, Crit.Alarms 1 set-up FALSE - Uint8

24-1* Drive Bypass

24-10 Drive Bypass Function [0] Disabled 1 set-up TRUE - Uint8

24-11 Drive Bypass Delay Time 0.0 s 1 set-up TRUE 0 uint_16

Parameter Lists VLT HVAC Basic Drive Programming Guide

MG.18.B1.02 - VLT

is a registered Danfoss trademark 91

5 5

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 98 99

Programming Guide 1
1 Introduction 2
3 Parameters 2
Contents 2
2 MG.18.B1.02 - VLT 3
4 Troubleshooting 4
5 Parameter Lists 4
4 MG.18.B1.02 - VLT 5
1.1.2 Symbols 7
1.1.3 Abbreviations 7
Definitions 8
175ZA078.10 9
Pull-out 9
MG.18.B1.02 - VLT 10
High Voltage 11
1.1.6 Electrical Overview 12
2 How to Programme 13
14 MG.18.B1.02 - VLT 15
Closed Loop Set-up Wizard 17
Main Menu 19
* English 21
* Interna 21
* Active Set 22
3.1.3 0-3* LCP Custom Readout 23
3.1.4 0-4* LCP 24
3.1.5 0-5* Copy / Save 24
3.1.6 0-6* Password 24
* Variable 25
* [0.01 - 26.0 26
* [100.0 26
* Off No function 26
3.2.3 1-3* Adv. Motor Data 27
1-4* Cable Length 27
3.2.7 1-7* Start Adjustments 28
3.2.8 1-8* Stop Adjustments 29
3.2.9 1-9* Motor Temperature 29
3.4.1 3-0* Reference Limits 31
3.4.2 3-1* References 31
* Analog in 54 32
* Local bus 32
* [0.05 32
3.4.5 3-8* Other Ramps 33
3.5.1 4-1* Motor Limits 34
3.5.2 4-5* Adj. Warnings 34
3.5.3 4-6* Speed Bypass 35
3.6.1 5-0* Digital I/O Mode 36
3.6.2 5-1* Digital Inputs 36
* No operation 38
* Coast inverse 38
3.6.3 5-4* Relays 39
5-40 Function Relay 40
Option: Function: 40
3.6.4 5-9* Bus Controlled 41
3.7.1 6-0* Analog I/O Mode 42
3.7.2 6-1* Analog Input 53 42
3.7.3 6-2* Analog Input 54 43
* [0.0 - 200.0 44
* [0.0 - 100.0 %] 44
* 0-20 mA 45
Options - Group 8 47
3.8.1 8-0* General Settings 47
3.8.2 8-3* FC Port Settings 47
3.8.3 8-5* Digital/Bus 48
3.8.4 8-7* BACnet 49
3.8.6 8-9* Bus Feedback 50
3.9.1 13-** Prog. Features 51
13-0* SLC Settings 51
* Do not reset 53
* Disabled 53
* [-9999.0 54
* [0.0 54
13-52 SL Controller Action 58
* Manual reset 59
3.10.4 14-4*Energy Optimising 60
3.10.5 14-5* Environment 60
* [1.0 - 16.0 kHz] 61
3.11.1 15-0* Operating Data 62
3.11.2 15-3* Alarm Log 62
3.12.1 16-0* General Status 64
3.12.2 16-1* Motor Status 64
3.12.3 16-3* Drive Status 65
* [0.1 - 9999.0 69
* [0.0 - 400.0 %] 69
* [0.0 - 400.0 Hz] 70
* [0.0 - 100.0 70
Group 24 72
3.16.1 24-0* Fire Mode 72
Range: Function: 74
4.1.1 Alarm Words 77
4.1.2 Warning Words 77
4.1.3 Extended Status Words 78
4.1.4 Fault Messages 78
78 MG.18.B1.02 - VLT 79
5.1.3 1-** Load and Motor 83
5.1.4 2-** Brakes 84
5.1.5 3-** Reference/Ramps 84
5.1.6 4-** Limits/Warnings 85
5.1.7 5-** Digital In/Out 85
5.1.8 6-** Analog In/Out 86
5.1.9 8-** Comm. and Options 87
5.1.10 13-** Smart Logic 88
5.1.13 16-** Data Readouts 90
5.1.16 22-** Appl. Functions 91
92 MG.18.B1.02 - VLT 93
94 MG.18.B1.02 - VLT 95
96 MG.18.B1.02 - VLT 97
*MG18B102* 98

Kommentare zu diesen Handbüchern

Keine Kommentare

Danfoss VLT HVAC Basic Drive FC 101 Technical Information Seite 92

Kommentare zu diesen Handbüchern