Danfoss VLT 5000 Bedienerhandbuch PDF herunterladen (Seite 28)

Wiring

• Digital Inputs – Pushbuttons - 3 Wire Start/Stop

– Term. 18 (P 302) set to “Latched Start”

– Term. 16 (P 300) set to “Stop Inverse” for terminal 17, 27, 29,

32 or 33.

The diagram above shows the wiring for a 3-wire Start/Stop. Power comes from terminal 12,

a source of +24Vdc. Terminal 18 is programmed for Latched Start and terminal 16 is

programmed for Stop Inverse. When the NC PB stop switch is closed, sending +24Vdc to

terminal 16, then terminal 18 can be pressed sending +24Vdc into terminal 18 giving it a

start command. A latched signal continues to run the drive until the NC PB is opened,

sending a stop command to the drive.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 44 45

Keine Kommentare

Danfoss VLT 5000 Bedienerhandbuch Seite 28